AC Contactor - Low Voltage Electric Components
Introduction: AC Contactor 　MDL2-E Series AC Contactor (hereinafter refers to the contactor) applies to AC 50Hz or 60Hz 690V working voltage 12A current circuit. It is used for remote accessing and breaking circuit as well as frequent starting and controlling the AC electrical motor. The contactor can install auxiliary contact group conveniently and protect the possible overload circuit if combined with suitable thermal relay.
The contactor adopts horizontally dynamic double-breakpoints, modular appendix and zero-arc design. It has strong combination capability, small volume and reliable performance.
It can replace LC1-K, LC1-E series imported products of French TE Company and function as the signal amplification and conversion in microelectronic interfaced circuit.
Working and Environment Conditions: AC Contactor
â–³Surrounding air temperature: -5°C~+40°C
The altitude of the installation site should below 2000m.
Atmospheric relative humidity should below 50% at the maximum temperature +4 O°C. It can be a little higher at lower temperature. With the consideration of the dew caused by the change of the temperature.
Order Information The following information should be stated: the model and name of the contactor, the frequency and voltage of the control coil and the quantity.
E.g.: 100 pieces of L2-E0610 AC contactor, coil voltage 220V, 50Hz;
100 pieces of MDL2-E0901AC contactor, coil voltage DC 220V
Model and Meaning - AC Contactor [Low Voltage Electric Components]
Contour & Installation Dimensions - AC Contactor
| Auxiliary contact group specifications | Number of the contact | |
| Normal opened(NO) | Normal closed(NC) | |
| F2-E20 | 2 | 0 |
| F2-E11 | 1 | 1 |
| F2-E02 | 0 | 2 |
| Screw connected | Plug connected | |
| Non-cold voltage terminal | 1*0.75mm2~2*2.5mm2 | Can access to a TT1-2.5/63*0.8 type plug |
| Cold voltage terminal | 2*0.5mm2~1*2.5mm2 | |
MDL2-E Series AC ContactorBack
Complete set switchgear-Power Control System
