Complete set Switchgear- Power Control System - Low Voltage switchgear

GCS Low Voltage switchgear, Vacuum Circuit Breaker

Equipment Features - GCS Low Voltage switchgear
Improve transfer thermal capacity and substantially reduce the addition temperature transferred by the adapter, the cable head and the indirect board.
The clearness and reliability among functional boards and separated room are not to be affected by certain malfunction unit. Thus, the breakdown is reduced to minimum.
The horizontal arrangement of generatrix enhances the thermal and dynamic stability of the equipment which could withstand the impact of 80/176KA short circuit current.
Each MCC box has as many as 44 loop circuits which has taken the needs of large-capacity power plants and petrochemical systems into full account.
External cable is connected into the cable room so it can be in or out freely. Zero-sequence current transformer is put in the cables room which makes the installation and maintenance convenient.
The same power distribution system can match or restrict short-circuit current by the current limit reactor to keep the generatrix voltage at a stable value. It can also partially reduce the short circuit requirements of some electric components.
There are enough secondary connectors in each drawer unit, (one unit or above have 32 pairs, 1/2 unit has 20pairs) which could meet the need of the computer interface.
Installation Diagram of GCS Low Voltage switchgear [Power Control System]
GCS Low Voltage switchgear
General Box Code A B C D Note
GCS-TG1010-4 1000 1000 850 956 Contact box
GCS-TG0810-4 800 1000 650 956 Electricity box
GCS-TG0808-4 800 1000 650 756 Electricity box
GCS-TG0608-4 600 800 450 756 Electricity box
General Box Code A B C D E F×G
GCS-TG1010-2 1000 1000 850 956 60 400×400
GCS-TG0810-2 800 1000 650 956 160 200×400
GCS-TG1008-2 1000 800 850 756 60 400×400
GCS-TG1008-2 800 800 650 756 160 200×400
Order Information - GCS Low Voltage switchgear
1. All products model (includes main circuit programme NO. and each auxiliary circuit programme NO.)
2. Main circuit system combination order chart.
3. Auxiliary circuit electricity schematic diagram.
4. Box components list.
5. Other special requirements inconsistent with normal condition.
6. Color of the Switchgear surface (the manufacture standard color is: light tan)
2 1 Back